Product Classification Results Page

Products Category

Home ꄲ Traditional Racking

Push -back Racking

Suitable for centralized warehouse systems, each shelf layer allows up to four pallets of depth. Each tray is located on the same shelf floor, except for the last tray, placed above the cart for movement, driven by the running track. A storage system suitable for moderate turnover products, which can store more than two pallets of different fine products (last in, first out storage system).
Gravity Racking

Add gravity roller track and slight slope Gravity Racking so that the tray can slide. It is introduced at one end of the higher track, and the goods are slid to the other end by gravity and velocity control, from which the goods are extracted.
Drive In Racking

Drive in racking consists of column group, corbel, corbel beam, top beam, top pull, back pull, etc. Full insertion assembly structure, corbel for one-time stamping cross, high strength, beautiful appearance, corbel beam for slope rib type.
Double Deep Racking

Double deep , is a kind of shelf type designed as double row parallel storage, matching the use of special scissors forklift. The double-in-depth shelf series is derived from heavy-duty cross-beam shelves, which has simple structure and high storage capacity.
NVA Pallet Racking

NVA pallet racking is a kind of extended application of crossbeam shelf. Because the forklift handling passage of its shelf system is narrower, it is named NVA pallet racking .
Cantilever Racking

Cantilever acking suitable for storing long materials, ring materials, plates, pipes and irregular goods. Cantilever can be single or double-sided, according to the bearing capacity can be divided into light, medium, weight type three.
Mezzanine Floor Racking（multi-tier racking）

Mezzanine floor racking adopt the layer type design, make the upper and lower body of the shelf add pedestrian passageway at the appropriate height, design into several storeys pavilion, the shelf has the facilities such as staircase and cargo hoist, so as to facilitate the goods to be suitable for the storehouse higher.
Platform

The steel structure platform refers to the use of square pipe, round pipe, H section steel or special C type, clasp beam as the main and auxiliary load bearing beam of the floor bearing layer.
Gravity pallet rack

gravity roller track and slight slope Gravity Racking so that the tray can slide. It is introduced at one end of the higher track, and the goods are slid to the other end by gravity and velocity control, from which the goods are extracted.
The first-in-first-out storage system is adopted to make the movable storage complete product turnover and carry out the first-in-first-out operation of the tray thoroughly. This trait is ideal for short-term storage.
Heavy and medium cantilever shelf

Cantilever racking suitable for storing long materials, ring materials, plates, pipes and irregular goods. Cantilever can be single or double-sided, according to the bearing capacity can be divided into light, medium, weight type three. The cantilever shelf has the characteristics of structural stability, good load capacity and high space utilization ratio.
Medium laminated shelf

Long Span racking are designed for manual storage of goods. By making full use of the warehouse height, the operator can be raised to the required height the operator to the required height, and pass through the passage between the shelves.
Medium laminated shelf

Long Span racking are designed for manual storage of goods. By making full use of the warehouse height, the operator can be raised to the required height the operator to the required height, and pass through the passage between the shelves.